10
Plug & Play Feature
When the television is initially powered ON, three basic
customer settings proceed automatically and subsequently:
setting the language, channel and clock.
1
If the television is in Standby mode (red light visible on the
television front panel), press the
POWER
button on the remote
control.
Result:
The message Plug & Play is displayed. It flickers for a
little while and then the Language menu is automatically
displayed.
2
Press the
s
or
t
button to select required language. Press the
MENU
button to enter the language, and then the message Ant.
Input Check is displayed.
â
If any language is not selected on the Language menu, the
Language menu will be displayed about 30 seconds later.
3
Make sure that the antenna is connected to the TV. And then press
the
+
or
button to store the channels (refer to Storing the
Channels Automatically on page 12).
Result:
The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range.
4
When searching and storing is complete, the Time menu is
displayed.
5
Press the
+
or
button to move to the hour or minute. Set the hour
or minute by pressing the
s
or
t
button (refer to Setting and
Displaying the Current Time on page 23).
6
When you have finished, press the
MENU
button.
Result:
The message ENJOY YOUR WATCHING is displayed,
and then the channel which has been stored will be
activated.
7
If you want to reset this feature...
1
Press the
MENU
button.
2
Press the
s
or
t
button to select the Function, and then
press the
+
or
button.
3
Select the Plug & Play by pressing the
s
or
t
button, and
then press the
+
or
button.
Result:
The message Plug & Play is displayed.
Function
Language : English
Plug & Play
E
Blue Screen
: Off
Child Lock
E
Plug & Play
ENJOY YOUR WATCHING
Ant. Input Check
P 1
471 MHz 48 %
Time
Clock
11 : 35
