10
ENG
Plug & Play Feature
When the television is initially powered ON, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1
If the television is in Standby mode, press the
POWER
button
on the remote control.
Result:
The message “Plug & Play” is displayed. It flickers for a
little while and then the “Language” menu is automatically
displayed.
2
Press the
▲
or
▼
button to select required language. Press the
MENU
button to enter the language, and then the message “Ant.
Input Check” is displayed.
➣
If any language is not selected on the “Language” menu, the
“Language” menu will be displayed about 30 seconds later.
3
Make sure that the antenna is connected to the TV. And then press
the
+
or
–
button to store the channels (refer to “Storing the
Channels Automatically” on page 12).
Result:
The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range.
4
When searching and storing is complete, the “Time” menu is
displayed.
5
Press the
+
or
–
button to move to the hour or minute. Set the hour
or minute by pressing the
▲
or
▼
button (refer to “Setting and
Displaying the Current Time” on page 23).
6
When you have finished, press the
MENU
button.
Result:
The message “ENJOY YOUR WATCHING” is displayed,
and then the channel which has been stored will be
activated.
7
If you want to reset this feature...
1
Press the
MENU
button.
2
Press the
▲
or
▼
button to select the “Function”, and then
press the
+
or
–
button.
3
Select the “Plug & Play” by pressing the
▲
or
▼
button, and
then press the
+
or
–
button.
Result:
The message “Plug & Play” is displayed.
W
se
in
Function
Language : English
Plug & Play
Blue Screen
: Off
Child Lock
Plug & Play
ENJOY YOUR WATCHING
Ant. Input Check
P 1
471 MHz 48 %
Time
Clock
11 : 35
01611A_ENG_europe 6/22/05 5:11 PM Page 10
