10
ENG
Plug & Play Feature
(depending on the model)
When the television is initially powered on, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1
If the television is in Standby mode, press the
POWER
(
) button
on the remote control.
Result:
The message
Plug & Play
is displayed. It flickers for a
little while and then the
Language
menu is automatically
displayed.
2
Press the
▲
or
▼
button to select required language. Press the
MENU
(
) button to enter the language, and then the message
Ant. Input Check
is displayed.
➣
If any language is not selected on the
Language
menu, the
Language
menu will be displayed about 30 seconds later.
3
Make sure that the antenna is connected to the TV. And then press
the
œ
or
√
button to store the channels (refer to
Storing the
Channels Automatically
on page 12).
Result:
The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range.
4
When searching and storing is complete, the
Time
menu is
displayed.
5
Press the
œ
or
√
button to move to the hour or minute. Set the
hour or minute by pressing the
▲
or
▼
button (refer to
Setting
and Displaying the Current Time
on page 24).
6
When you have finished, press the
MENU
(
) button.
Result:
The message
ENJOY YOUR WATCHING
is displayed, and
then the channel which has been stored will be
activated.
7
If you want to reset this feature...
1
Press the
MENU
(
) button.
2
Press the
▲
or
▼
button to select the
Function
, and then
press the
œ
or
√
button.
3
Select the
Plug & Play
by pressing the
▲
or
▼
button, and
then press the
œ
or
√
button.
Result:
The message
Plug & Play
is displayed.
Function
Language : English
Time
√
Plug & Play
√
Blue Screen
: Off
Child Lock
√
Plug & Play
ENJOY YOUR WATCHING
Select
Enter
Exit
P 1
471 MHz 48 %
Exit
Ant. Input Check
Auto Store
Exit
Language
Engllish
Indonesia
Malaysia
Adjust
Select
Time
Clock
- - : - - am
Move
Exit
KS1A(TM75)ENG_asia(03121A) 11/6/03 11:28 AM Page 10
