background image

You can scan the frequency ranges
available on your television and in
your country and store all the
channels found automatically.

The channels are stored in the
order in which they appear in the
frequency bands. It is possible that
the automatically allocated
numbers may not correspond to
those by which you wish to
identify the channels. If this is the
case, you can then sort them
manually.

If the television is in standby mode (green
light on), press the POWER (

) on the

remote control.

Press the MENU.
Result:

The main on-screen menu is
displayed.

Press the 

to select the “Setup”.

Press the 

+

.

Result:

The “Setup” is displayed.

Press the 

to select the “Auto store”.

Press the 

+

.

Result:

When searching and storing is
complete, the “Sort” is displayed
with the “From”.

Press the 

+

or 

until the channel number

that you wish to change is displayed.

Result:

The selected channel’s picture is
displayed.

Press the 

to select the “To”.

Press the 

+

or 

until the new number by which you wish to identify the channel is displayed.

Result:

The selected channel is exchanged with the one specified.

Example: If you select “3” for the “From” and “1” for the “To”:

Channel 3 becomes Channel 1

Channel 1 becomes Channel 3

To...

Then...

Confirm the “Store” exchange

1

Press the 

to select the “Store”.

2

Press the 

+

or 

.

Result: “OK” is displayed. You can exchange

other channel numbers by selecting
the “From” and returning to Diagram 

4

.

Cancel this change but

Select the “From” and return to Diagram 

4

.

continue sorting the channels

When you have finished sorting the channels, press the MENU until the menus disappear.

2

3

8

8

8

8

S

S

S

S

toring the Channels Automatically

4

Menu
Picture

Setup

Function

Select

▼  ▲

Enter

:

Exit

: MENU

Setup
Manual store

Auto store

CH. skip
Fine tune
Sort

Sort

From :

1

To

:

3

Store

:

?

If
h
th
th
If
d
tu

Y
yo
o
th
h
d

A
sp
d

1

1

1

1

1

5

AA68-00658A-Eng_0624  6/24/05  10:01 AM  Page 8

Summary of Contents for CB-14Y4T





















Reviews: