background image

7

Warning

 

There is a high voltage inside the product. Never disassemble, repair or modify the product yourself.

 

Contact Samsung Customer Service Center for repairs.

 

To move the product, first disconnect all the cables from it, including the power cable.

 

If the product generates abnormal sounds, a burning smell or smoke, disconnect the power cord 
immediately and contact Samsung Customer Service Center.

 

Do not let children hang from the product or climb on top of it.

 

Children may become injured or seriously harmed.

 

If the product is dropped or the outer case is damaged, turn off the power and disconnect the power 
cord. Then contact Samsung Customer Service Center.

 

Continued use can result in a fire or electric shock.

 

Do not leave heavy objects or items that children like (toys, sweets, etc.) on top of the product.

 

The product or heavy objects may fall as children try to reach for the toys or sweets resulting in a 
serious injury.

 

During a lightning or thunderstorm, power off the product and remove the power cable.

 

Do not drop objects on the product or apply impact.

 

Do not move the product by pulling the power cord or any cable.

 

If a gas leakage is found, do not touch the product or power plug. Also, ventilate the area 
immediately.

 

Do not lift or move the product by pulling the power cord or any cable.

 

Do not use or keep combustible spray or an inflammable substance near the product.

 

Ensure the vents are not blocked by tablecloths or curtains.

 

An increased internal temperature may cause a fire.

 

Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects that burn easily (paper, 
matches, etc) into the product (via the vent or input/output ports, etc).

 

Be sure to power off the product and disconnect the power cord when water or other foreign 
substances have entered the product. Then contact Samsung Customer Service Center.

 

Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the 
product.

 

Be sure to power off the product and disconnect the power cord when water or other foreign 
substances have entered the product. Then contact Samsung Customer Service Center.

Operation

Summary of Contents for C49HG90DM Series






















































Reviews: