Samsung C34H890 User Manual Download

Page: 23 / 48

―

The read/write rate will be affected by the USB device and your PC.

―

The product does not support media play. If you need to play a file in your USB device, please connect the
product as a Hub to your PC and play the file on your PC.

―

For USB-related problems caused by OS, drive programs or software, please contact relevant suppliers.

―

With the launch of various USB devices on the market, we cannot guarantee that our products are matched
with all USB devices.

―

For an external mass-storage HDD requiring external power supply, be sure to connect it to a power source.

―

The battery can be charged in the power-saving mode, but it cannot be charged when the product is
powered off.

―

Charging your USB device is not possible if the power cable is disconnected from the power socket.

―

The USB device needs to be purchased separately.

Connecting the Power

POWER IN

To use the product, connect the power cable to a power outlet and the

POWER IN

port on the product.

―

The input voltage is switched automatically.

Summary of Contents for C34H890

















































Search results

Summary of Contents for C34H890

Reviews:

Related manuals for C34H890

Brands by name

Popular brands

Samsung C34H890, User Manual

Search results

Summary of Contents for C34H890

Reviews:

Related manuals for C34H890

Brands by name

Popular brands