18
Installation
Attaching the Stand
―
Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
1
2
3
4
Insert the stand neck into the stand base in the
direction shown in the figure.
Check that the stand neck is firmly connected.
Tightly fasten the connecting screw at the bottom
of the stand base.
Place the stand neck of the display on the device as
per the positions of the fasteners.
Stand assembly is complete.
-
Caution
Do not press down on the monitor. There is a risk of
damaging the monitor.
Summary of Contents for C34H890
Page 37: ...37 ...
