2-13
Installation and Connection
2-13 Connecting an AV device using a D-Sub cable
Make sure that the AV device and your projector are turned off.
1.
Connect the [PC IN] terminal at the back of the projector to the D-Sub terminal of your AV device using a D-Sub cable.
- For supported input signal formats, resolutions, and frequencies, see AV Timing (D-Sub) in Section 2-8, "Supported Display
Modes".
2.
Connect the [
AUDIO IN (L-AUDIO-R)
] terminal at the back of the projector to the Audio out terminal of your AV device using an
audio cable (Not supplied).
