Samsung Bixolon SRP-500, Command Manual, Page: 13 / 27

Rev. 1.00
- 13 -
SRP-500
ESC @
[Name] Initialize printer
[Format] ASCII ESC @
Hex 1B 40
Decimal 27 64
[Description] Clears the data in the print buffer and resets the printer mode to the
mode that was in effect when the power was turned on.
[Notes]
The DIP switch settings are not checked again.
The data in the receive buffer is not cleared.
ESC D n1... nk NUL
[Name] Set horizontal tab positions
[Format] ASCII ESC D n1...nk NUL
Hex 1B 44 n1...nk 00
Decimal 27 68 n1...nk 0
[Range] 1 ≤ d ≤ 255
0 ≤ k ≤ 32
[Description] Sets horizontal tab positions.
n specifies the column number (counted from the beginning of the line) for setting a
horizontal tab position.
k indicates the total number of horizontal tab positions to be set.
[Notes]
The tab position is set at [character width x n] from the beginning of the line. The
character width includes the right-side space of the character, and is twice the normal
value when double-width is specified.
This command deletes horizontal tab positions that have already been set.
When "n = 8" has been set for the horizontal tab position, the printing position moves to
the ninth digit when HT is executed.
Up to 32 tab positions can be set. Data exceeding 32 tab positions is processed as
normal data. Input <n>k in ascending order and place a NUL code <00>H at the end
when <n>k is less than or equal to the preceding value <n>k-1, tab setting is finished
and the following data is processed as normal data.
ESC D NUL cancels all horizontal tab positions.
The previously specified horizontal tab positions do not change, even if the character
width changes.
[Default] The default tab positions are at intervals of 8 characters (columns 9,
17, 25, ...) for the font B (12 x 14).
[Reference] HT