Samsung BE70T-H E-Manual Download

Page: 89 / 199

Using the Voice Recognition feature

You can change the settings of a Voice Assistant after selecting it.

Select the Voice Assistant

Settings General Voice Voice Assistant

Select the

Voice Assistant

to use.

To use this function, the TV must be connected to the Internet.

This function may not be supported depending on the model or geographical area.

•

Bixby

For more information about the

Bixby

, refer to "Using Bixby".

When

Bixby

is selected, you can configure for

Voice Hint

Bixby Voice settings

, and

Bixby Profile Settings

•

Amazon Alexa

With

Amazon Alexa

, you can perform the following tasks on your TV.

– Play back your favourite music.

– Get the weather information.

– Control smart home devices.

When

Amazon Alexa

is selected, you can configure for

Amazon Alexa Settings

To use

Amazon Alexa

, access the URL on the TV screen or scan the QR code with your computer or mobile device, and

then enter the authorization code displayed on the TV screen.

Amazon Alexa

may not be available depending on the region.

For more information about the usage and settings of

Amazon Alexa

, run

Amazon Alexa Settings

(

Settings

General

Voice

Amazon Alexa Settings

For voice command examples, refer to

Amazon Alexa Settings

To enable

Amazon Alexa Settings

, make

active.

- 89 -

Summary of Contents for BE70T-H








































































































































































































Search results

Summary of Contents for BE70T-H

Reviews:

Related manuals for BE70T-H

Brands by name

Popular brands

Samsung BE70T-H, E-Manual

Search results

Summary of Contents for BE70T-H

Reviews:

Related manuals for BE70T-H

Brands by name

Popular brands