Samsung BE43R User Manual Download

Page: 60 / 139

Sound Adjustment

Configure the sound (

Sound

) settings for the product.

Chapter 06

Sound Mode

→

Sound

→

Sound Mode

→

ENTER

Sound

Sound Mode

HDMI Sound

Sound Effect

Speaker Settings

Reset Sound

Standard

AV(HDMI)

– The displayed image may differ depending on the model.

You can select a sound mode to suit your personal preferences.

•

Standard

: Selects the normal sound mode.

•

Music

: Emphasizes music over voices.

•

Movie

: Provides the best sound for movies.

•

Clear Voice

: Emphasizes voices over other sounds.

•

Amplify

: Increase the intensity of high-frequency sound to allow a better listening experience for the hearing

impaired.

―

Speaker Select

is set to

External

Sound Mode

is disabled.

Summary of Contents for BE43R












































































































































Search results

Summary of Contents for BE43R

Reviews:

Related manuals for BE43R

Brands by name

Popular brands

Samsung BE43R, User Manual

Search results

Summary of Contents for BE43R

Reviews:

Related manuals for BE43R

Brands by name

Popular brands