Samsung BE43R User Manual Download

Page: 24 / 139

Connection using a DVI Cable (Digital type)

―

Connecting parts may differ in different products.

DVI/MAGICINFO IN

AV/COMPONENT/DVI/HDMI AUDIO IN

HDMI

DVI/MAGICINFO IN

―

You can use the DVI port on the product as an HDMI port by using a DVI-HDMI adapter.

Audio is not available if the DVI port on the product is connected to the HDMI port on the PC

using a DVI-HDMI adapter.

Connection Using an HDMI-DVI Cable

―

When you connect a PC to the product using an HDMI-DVI cable, set

Edit Name

DVI PC

access video and audio content stored on the PC.

―

Connecting parts may differ in different products.

After connecting a computer to the product with an HDMI-DVI cable, make sure to configure

the settings as shown below to enable the video and audio from the computer.

•

Sound

→ set

HDMI Sound

PC(DVI)

AV/COMPONENT/DVI/HDMI AUDIO IN

HDMI IN 1, HDMI IN 2

Summary of Contents for BE43R












































































































































Search results

Summary of Contents for BE43R

Reviews:

Related manuals for BE43R

Brands by name

Popular brands

Samsung BE43R, User Manual

Search results

Summary of Contents for BE43R

Reviews:

Related manuals for BE43R

Brands by name

Popular brands