Network Settings
Please contact your Internet Service Provider
to find out if your IP address is static or
dynamic. If it is dynamic - and most are - we
recommend using the Auto procedure for
network setup. This is easiest and will work in
the majority of cases. If it is static, you must
use the manual set up procedure.
(See Wireless - Manual on this page.)
Network setup directions start below.
✎
NOTE
`
This unit can only be connected to a Network
via a wireless connection.
Wireless Network
You can set up a wireless network connection
in three ways:
Wireless - Automatic
1.
In the Home screen, select
Settings
,
and then press the
v
button.
2.
Select
Network
, and then press the
v
button.
3.
Select
Network Setting
, and then press
the
v
button.
4.
Select
Wireless
in the Network Setting
screen, and then press the
v
button.
The player searches for and then
displays a list of the available networks.
5.
Select the desired network, and then
press the
v
button.
6.
On the Security screen, enter your
network's Security Code or Pass
Phrase.
Enter numbers directly using the number
buttons on your remote control. Enter
letters by selecting a letter with an arrow
button, and then pressing
v
button.
✎
NOTE
`
To view the password as you enter it, use the
arrow buttons to select
Show Password
on
the right side, and then press
v
button.
7.
When done, select
done
and then press
the
v
button. The player verifies the
network connection and then connects
to the network.
8.
When verification is complete, select
OK
, and then press the
v
button.
✎
NOTE
`
You should be able to find the Security Code or
Pass Phrase on one of the set up screens you
used to set up your router or modem.
Wireless - manual
If you have a static IP address or the
Automatic procedure does not work, you'll
need to set the Network Settings values
manually.
1.
Follow the directions in Wireless -
Automatic through Step 6.
2.
The player tries to connect to the network,
and then displays the connection failed
message.
3.
On the bottom of the screen, select
Ip
Settings
, and then press the
v
button.
The IP Settings screen appears.
4.
Select the IP Setting field, and then
press the
v
button.
5.
Select
Enter manually
in the IP Setting
field, and then press the
v
button.
6.
Select a value to enter (
Ip Address
, for
example), and then press
v
button.
Use the number keypad on your remote
control to enter the numbers for the
value. You can also enter numbers using
the ▲▼ buttons. Use the ◄► buttons
on the remote control to move from
entry field to entry field within a value.
When done with one value, press the
v
button.
7.
Press the ▲ or ▼ button to move
to another value, and then enter the
numbers for that value following the
instructions in Step 6.
8.
Repeat Steps 6 and 7 until you have
filled in all values.
✎
NOTE
`
You can get the Network values from your
Internet provider.
9.
When finished, select
OK
, and then
press the
v
button. The Security
Screen appears.
10.
On the Security screen, enter your
network's Security Code or Pass
Phrase. Enter numbers directly using the
number buttons on your remote control.
Enter letters by selecting a letter with the
▲▼◄► buttons, and then pressing the
v
button.
11.
When finished, select
done
at the right
of the screen, and then press the
v
button. The player verifies the network
connection and then connects to the
network.
12.
After the player verifies the network,
select
OK
, and then press the
v
button.
Security Key/pIN
Before you begin, open the router's setup
menu on your PC and access the screen with
the WPS PIN entry field.
1.
In the Home screen, select
Settings
,
and then press the
v
button.
2.
Select
Network
, and then press the
v
button.
3.
Select
Network Setting
, and then press
the
v
button.
4.
Select
Wireless
in the Network Setting
screen, and then press the
v
button.
The player searches for and then
displays a list of the available networks.
5.
Select the desired network, and then
press the
v
button.
6.
Select the
Security Key
or
pIN
, and
then press the
v
button.
7
-1
.
If you select the
Security Key
, the
Keypad popup appears. Enter the PIN
code.
7
-2
.
Enter the PIN into the PIN entry field
in the router's Set Up screen and then
save the the screen.
✎
NOTE
`
Contact the manufacturer of the router for
instructions explaining how to access the
route's Set Up screens or refer to the router's
user's manual.
`
For WPS connection, set your wireless router’s
security encryption to AES. Setting to WEP
security encryption does not support WPS
connection.
Wireless network
setup
iptime23
setup
solugen_edu#1
WPS(PBC)
Search
Network Setting
You can connect your Blu-ray
player to the internet. Please
select which wireless network
to use.
m
Move
"
Select
'
Return
12
