04
Settings
Ğ
Wireless (General) - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
After following Steps 1 to 3 in "Configuring Your
Network Connection" on page 33.
1.
Select
Start
in the Network Settings screen,
and then press the
v
button. The product
searches for and then displays a list of the
available networks.
2.
Select the desired network, and then press
the
v
button.
3.
Select
Next
, and then press the
v
button
again.
4.
On the Security screen, enter your network's
Security Code or Pass Phrase. Enter
numbers directly using the number buttons
on your remote control. Enter letters by
selecting a letter with the ▲▼◄► buttons,
and then pressing the
v
button.
5.
When done, select
Next
at the right of the
screen, and then press the
v
button.
6.
The Network Status screen appears.
The product attempts to verify the network
connection and fails.
7.
Select
IP Settings
on the right of the screen,
and press the
v
button. The IP Settings
screen appears.
8.
Select the
IP Mode
field, and then set it to
Manual.
9.
Use the number keypad on your remote to
enter the Network values. Use the ▲▼◄►
buttons on the remote to move from entry
field to entry field.
|NOTE |
\
You can get these values from your Internet provider. You
can also view these values on most Windows computers.
For instructions, see "Getting the Network Settings
Values." on page 34.
10.
When done, highlight
OK
, and then press
v
button. The Network Status screen appears.
The product verifies the network connection
and then connects to the network. When it
is done, highlight
OK
, and then press
v
button.
Ğ
Wireless (General) - Automatic
After following Steps 1 to 3 in "Configuring Your
Network Connection" on page 33.
1.
Select
Start
in the Network Settings screen,
and then press the
v
button.
The product searches for and then displays a
list of the available networks.
2.
Press the
WPS(PBC)
button on your
router within two minutes. Your product
automatically acquires all the network
settings values it needs and connects to your
network.
The Network Status screen appears. The
product connects to the network after the
network connection is verified.
Wi-Fi Direct
The Wi-Fi Direct function allows you to connect
Wi-Fi Direct devices to the product and each other
using a peer-to-peer network, without a wireless
router.
1.
Turn on the Wi-Fi direct device and activate
its Wi-Fi Direct function.
2.
In the Home screen, select
Settings
, and
then press the
v
button.
3.
Select
Network
, and then press the
v
button.
4.
Select
Wi-Fi Direct
, and then press the
v
button.
The Wi-Fi Direct devices that you can
connect appear.
Display
Audio
Network
System
Support
Refresh
Close
Wi-Fi Direct
Device Name : [HDD]E8900
Select your Wi-Fi Direct device to connect to.
AndroidXXXXXXX Disconnected
'
Return
English
35
|
02230J-BD-E8900-EN-ENG.indd 35
2012-04-13 오후 2:53:21
