0
English
Setup
Wireless Network
You can setup the wireless network three ways:
Using PBC (WPS)
Using the Auto Network Search function.
Manually.
Each method is described below.
Setting Up the Wireless Network Connection
- PBC (WPS)
The easiest way to set up the wireless network
connection is using the PBC (WPS) function.
If your wireless router has a PBC (WPS) button,
follow these steps:
In the Network Settings menu, press the ▲▼
buttons to select
Network Setting
, and then
press the
ENTER
button.
The Internet Protocol Setup screen appears.
Press the
RED (A)
button on the remote
control.
Press the
PBC (WPS)
button on your router
within two minutes. Your player displays the
Network Selection Screen, and automatically
acquires all the network setting values it
needs and connects to your network. When
it is done, it displays an
OK
button. Press the
ENTER
button on your remote.
After the network connection is set up, press
the
RETURN
button to exit the Network
Setting screen.
Setting Up the Wireless Network Connection
- Auto Network Search
Most wireless networks have an optional security
system that requires devices that access the
network to transmit an encrypted security code
called an Access or Security Key. The Security
Key is based on a Pass Phrase, typically a word
or a series of letters and numbers of a specified
length you were asked to enter when you set up
security for your wireless network. If you use this
method of setting up the network connection, and
have a Security Key for your wireless network,
you will have to enter the Pass Phrase during the
setup process.
•
•
•
1.
2.
3.
4.
Setting Up the Network Connection
To set up the wireless connection using Auto
Network Search, follow these steps:
In the Network Settings menu, press the ▲▼
buttons to select
Network Setting
, and then
press the
ENTER
button.
The Internet Protocol Setup screen appears.
Press the ▲▼ buttons to select the
Internet
Protocol Setup
, and then press the
ENTER
button.
Press the ▲▼ buttons to select
Auto
or
Manual
, and then press the
ENTER
button.
If you selected
Auto
, press the ▲ button to
go to
Access Point Selection
, and then
press the
ENTER
button.
The Network function searches for available
wireless networks.
When done, it displays a list of the available
networks.
In the list of networks, press the ▲▼ buttons
to select a network, and then press the
ENTER
button.
If the PIN/Security pop-up appears, go to
Step 7. If the Network Connecting Screen
appears, go to Step 11.
Press the ▲▼ buttons to select PIN or
Security.
For most home networks, you would select
Security (for Security Key).
On the Security screen, enter your network’s
Pass Phrase.
1.
2.
3.
4.
5.
6.
7.
8.
Display
Audio
System
Network
Language
Security
General
Support
Settings
Network Setting
Access Point Selection : Not Selected
\
Internet Protocol Setup : Auto
IP Address
: 0 0 0 0
Subnet Mask
: 0 0 0 0
Gateway
: 0
0
0
0
DNS
: Auto
DNS Server
:
0
0
0
0
a
PBC (WPS)
>
Move
"
Select
'
Return
