E-
15
Selecting Energy Saving Mode
If you wish to save Energy when using your air conditioner,
select the Energy Saving mode with the Energy Saver button.
1 To select the Energy Saving mode, press the Energy Saver button on the remote
control or unit one or more times until the Energy Saver indicator lights up.
Result:
Result:
The fan and compressor cycle on and off together.
The fan will continue to run for a short time after the
compressor cycles off.
2 To stop the Energy Saving mode, press the Energy Saver button on the
remote control or unit again.
The fan runs at all times, while the compressor cycles on and off.
If you select the Sleep Timer in the Energy Saving mode, the Energy
Saving will be cancelled and the air conditioner will start up in the
Sleep Timer mode.
Remote Control
Control Panel
Temperature and Humidity Ranges
H
SI
L
G
N
E
21 C to 32 C approx.
The following table indicates the temperature and humidity ranges within which the
air conditioner
can be used in the best condition .
Cooling
21 C to 43 C approx.
80% or less
Mode
Indoor Humidity
IndoorTemperature
OutdoorTemperature
If the air conditioner is used at...
Then...
Higher temperatures
The automatic protection feature may be triggered and the air
conditioner stopped.
Lower temperatures
Higher humidity levels
A water leakage or some other malfunction may happen if the
heat exchanger freezes.
Water way condense on and drip from the surface of the unit if
it is used for long periods.
