Solving Common Problems
Before contacting the after-sales service, perform the following simple checks. They may save you
the time and expense of an unnecessary service call.
Problem
Explanation/Solution
The air conditioner does not
◆
Check that the circuit breaker used for the air conditioner has not been
operate at all
triggered.
◆
Check that the power cable is plugged into a wall socket and the socket
is switched on, if necessary.
◆
Check that the operating mode indicator (COOL or FAN) on the
unit is lit up; if necessary press
(On/Off) on the remote control or unit.
The air conditioner does not
◆
Check that there are no obstacles between you and the unit.
operate with the remote control
◆
Replace the remote control batteries if necessary.
◆
Check that you are close enough to the unit (seven metres/yards or less).
No beep is heard when you press
◆
Check that you are pointing the remote control at the remote control
(On/Off) on the remote control
sensor on the unit.
◆
Replace the remote control batteries if necessary.
The air conditioner does not
◆
Check that the correct operating mode has been selected COOL.
cool
◆
The room temperature may be too low.
◆
Dust may be blocking the air filter; refer to page 13 for cleaning
instructions.
◆
Check that there is no obstacle blocking the air flow into or out of the unit.
The air flow direction does not
◆
Check that the air conditioner has been switched on; if necessary, press
change when you press the
(On/Off) on the remote control or unit.
(or on the unit)button
The timer is not correctly triggered
◆
Check that the timer has been programmed correctly; refer to page 11.
Odours are permeated in the
◆
Air the room.
room during air conditioning
E-
14
