Samsung AV-R710, Instruction Manual

Page: 27 / 34

53
GB
52
Presetting radio Stations
You can preset up to 30 FM and AM stations.
Press TUNER button.
•
Each time you press this button, FM
➝
AM
will be selected in turn.
Press TUNING MODE button to
select MANUAL and then press
TUNING/CH( ) button to
select 89.10.
• Refer to step 2, page 50, to tune in
automatically and manually.
Press TUNER MEMORY button.
•
Tuner number will blink on the display.
Press TUNING/CH( )
button to select preset 2.
•
You can select from presets 1 to 30.
Press TUNER MEMORY button.
•
Tuner number will disappear and station 89.10
will be saved in preset 2.
To preset other stations, repeat
steps 2 to 5.
To Listen to Preset Station
•
Press TUNING MODE button of the remote control to select the PRESET
and press TUNING/CH ( ) button.
E.g.: Setting station FM 89.10 in preset 2 .
REMOTE CONTROL
1
2
4
5
6
3
,
,
,
Using the RDS (Radio Data System) to receive FM stations
What information can RDS signals provide?
RDS allows FM stations to send an additional signal along with their regular program signals.
For example, the stations send their station names, as well as information about what type of
program they broadcast, such as sports or music, etc.
When tuned to an FM station which provides the RDS service,the RDS indicator
lights up on the display.
•
Description on RDS function
1. PTY (Program Type) : Displays the type of programme currently being broadcast
2. PS NAME (Program Service Name) : Indicates the name of broadcasting station
and is composed of 8 characters.
3. RT (Radio Text) : Decodes the text broadcast by a station (if any) and is composed
of maximum 64 characters.
4. CT (Clock Time) : Decodes the real time clock from the FM frequency.
• Some stations may not transmit PTY, RT or CT information therefore this may not be
displayed in all cases.
5. TA (Traffic Announcement) : When this symbol flashes it shows that the traffic
announcement is in progress.
You can see the RDS signals the station sends on the display.
TO show the RDS signals
Press RDS DISPLAY while listening to an FM station.
Each time you press the button, the display change to show you the following information :
PS (Program Service) : While searching, " PS " appears and then the station names will be
displayed. " NO PS " appears if no signal is sent.
RT(Radio Text) : while searching, " RT " appears and then text messages the station
sends will be displayed. " NO RT " appears if no signal is sent.
Frequency : station frequency (non-RDS service)
About characters shown in the display
When the display shows PS, or RT signals, the following characters are used.
•
The display window cannot differentiate upper case and lower case letters and always
uses upper case letters.
•
The display window cannot show accented letters, “ A ,” for instance, may stands for
accented “ A’s ” like “ À ,  , Ä , Á , Åand à .”
About RDS broadcasting
•
RDS may not operate correctly if the station tuned is not transmitting
RDS signal properly or if the signal strength is weak.
•
If searching finishes at once, “ PS ”, and “ RT ” will not appear on the display.
RADIO OPERA
TION