Samsung AS180UE, Service Manual

Page: 12 / 55

Operating Instructions and Installation
3-6
Samsung Electronics
3-2-2(a) Fixing the Installation Plate
Installation plate
Pipe hole (ø65mm)
260mm
250mm 145mm
Indoor unit
Installation plate
Weight
200mm 100mm
250mm 350mm
Pipe hole
(ø65mm)
Determine the pipe hole position for installation
and drill the pipe hole (65mm inner diameter)
so that it slants slightly downward.
1. Install the installation plate horizontally on
structural members (studs, etc.) in the wall.
2. To mount the installation plate on a concrete
wall with anchor bolts, utilize the anchor bolt
holes as illustrated in the left figure.
3. When the anchor bolts are already driven in the
wall, also utilize the anchor bolts holes to secure
the installation plate. (If an anchor bolt is too
long, adjust the projecting length to 20mm or
less.)
1. As the left Fig.
Fix the wood pillar at the wood frame and
install installation plate with screw tap.
2. Fix the wood pillar with enough strength to
bear the weight of the indoor unit.
CUTTING A HOLE
MOUNTING THE INSTALLATION PLATE
When the refrigerant piping are hooked up from the rear.
When the installation plate is directly mounted on the wall.
Wood pillar Screw wood
Mounting at the window frame.