background image

Automatic (rotated :                                               ) 

Low

Medium

High

ENGLISH

Selecting the Heat Mode 

You can select the Heat mode if you want to heat your room. 
You can adjust the temperature and the fan speed when heating.

The fan speed indicator of the indoor unit varies according to
the temperature in the Automatic fan speed. 

N

N

N

N

o

o

o

o

tt

tt

e

e

e

e

E-

11

To control the airflow direction, refer to page 19.

5

Press the

button to adjust the temperature until the required tem

perature is displayed.
You can set the temperature between 16°C and 30°C.

Result:

Each time you press the

button : 

- The temperature is adjusted by 1°C
- The indoor unit beeps

If the room temperature reaches 5°C higher than the set
temperature, the air conditioner stops heating, but the fan
operates consistently.

If the room temperature reaches 3°C lower than the set 
temperature, the air conditioner starts heating again.

3

Press the       button on the remote control until       is displayed. 

Result:

The indoor unit beeps each time you press the

button.

The air conditioner runs in the Heat mode.

2

You can change modes at any time.

N

N

N

N

o

o

o

o

tt

tt

e

e

e

e

1

If necessary, press the       (On/Off) button.

Result:

The operation indicator on the indoor unit lights up.

The air conditioner starts up in the mode you selected last.

The indoor unit beeps.

Result:

◆  

Each time you press the

button, the indoor unit beeps.

◆  

The fan speed indicator increases and decreases 
continuously and turns round each time you press 
the

button.

For the first 3~5 minutes, the fan may not operate to 
prevent cool air from flowing out of the indoor unit.
It helps to warm the air in your room sufficiently.

Press the

button to select the fan speed until the required setting

is displayed.

4

Control Panel

 AS09HM3N IB_E_24637  11/11/05 11:23 AM  Page 11

Summary of Contents for AS09HM3N





























Reviews: