Samsung Semiconductor, Inc.
ARTIK 053s Development Kit Hardware User’s Guide
10
Pushbutton Switches
The ARTIK 053s Starter board includes four push button switches used for various purposes as shown in
.
Figure 6. Location of Push Button Switches on the Starter Board
The pushbutton switches shown in
are defined in
Table 5. JTAG Connector Pinout
Pin Name
Pin Number
Pin Number
Pin Name
XJTAG_TMS
1
2
VCC_EXT3P3
XJTAG_TCK
3
4
GND
XJTAG_TDO
5
6
GND
XJTAG_TDI
7
8
NC
XJTAG_TRST_N
9
10
GND
Table 6. JTAG Connector Pinout
Switch Number
Switch Name
Description
SW700
ARTIK Module Reset
Connects the XRESET_N signal on the ARTIK module to ground.
SW701
Arduino Reset
Pressing this button initiates a reset on the Arduino connector
interface.
SW702
Test Button 2
Pressing this button connects the XGPIO13 signal to ground. Can be
used as an application specific input.
SW703
Test Button 1
Pressing this button connects the XGPIO15 signal to ground. Can be
used as an application specific input.
Test Button 1
(SW703)
Test Button 2
(SW702)
ARTIK Module Reset
(SW700)
Arduino Reset
(SW701)
