10-18
Samsung Electronics
10-2-16 When the remote control is not receiving
1. Checklist :
1) Check if the connector was normally assembled.
2) Check the battery in remote control
3) All the lights out and check again : Change electronic typed to a
rescent light
4) Put the set in operation and check the voltage of display PBA
5) Replace the display PBA
2. Troubleshooting procedure
Exchange the display PBA
Have the battery in remote control?
All the lights out ?
NO
NO
NO
Check the connector to normally assemble.
YES
YES
YES
NO
If the connector was normally assemble?
Insert the battery in remote control.
Re-check the connector