※ In case you want more information about the controllers and accessories, please refer to the Controller and
Accessory TDB on pvi.Samsung.com site or Global Partner Portal site.
11. Installation
86
Viewing the typical installation
A typical installation will be similar to the one shown below.
Evaporator/fancoil (indoor)
Maximum pipe height
Maximum pipe length
Refrigerant lines,
electric, and drain
Compressor/condenser(outdoor)
(Unit : m)
Model
Pipe length
Pipe height
Minimum
Maximum
Standard for factory
charge
Maximum
**07*******
**09*******
**12*******
3
15
5
8
**18*******
**24*******
3
30
5
15
CAUTION
Outdoor Unit
Outer wall
Indoor Unit
Cut insulation to have
rainwater drained
Make a U-trap (A) on the pipe (which is
connected to the indoor unit) at outer wall
and cut the bottom part of the insulation
(about 10 mm) to prevent rainwater from
getting inside through the insulation.
CAUTION
CAUTION
•
For the product that uses the R-32 refrigerant, Install the indoor unit on the wall 1.8 m or higher from the floor.