
12
Preparation
English
Installation
Step 1-5 Preparing materials and tools
Materials in the indoor unit package
Make sure that the indoor unit package contains the following
materials:
Mounting bracket (1)
**07*******
**09*******
**12*******
**15*******
Mounting bracket (1)
**18*******
**24*******
Remote control (1)
Remote control battery (2)
Quick Guide for User (1)
Quick Guide for Installer (1)
Extra M4 x 12 tapping
screw (2)
Materials in the outdoor unit package
Make sure that the outdoor unit package contains the
following materials:
Rubber foot (4)
Drain plug (1)
If using a multi system, install as described in the
installation manual supplied with the outdoor unit.
Optional accessories
For information on the accessories that are available for each
model, see the submittal documents listed on page 3.
Materials supplied by the installer
Make sure you have all other materials required for the
selected installation method and location.
IMPORTANT
࡛
No mounting hardware, tubing, cables, and other
materials listed below are included with the appliance.
The required materials will vary, but may include the
following:
࡛
6-ft electrical whip for connecting the power from the
installed disconnect switch to the outdoor unit
࡛
UV-resistant vinyl line set tape for the exposed line set
࡛
Lines-set cover and fittings, if used
࡛
Miscellaneous pipe hangers
࡛
Miscellaneous screws and anchors for hanging pipe
hangers, the line-set cover, the indoor unit mounting
plate, and so on.
࡛
Electrical ring connectors for connecting all power and
communication wiring
࡛
Electrical tape
࡛
Refrigerant R-410A if additional refrigerant is required
due to line-set length
࡛
Closed cell foam tape insulation (roll)
࡛
Outdoor unit risers or L-brackets for wall installation
࡛
Silicone caulking for sealing the wall penetration
࡛
Rags
Piping and cables
Connecting the indoor and outdoor units requires a
premanufactured refrigeration line set (recommended) or a
line set assembled by the installer that includes.
࡛
Soft-copper line set insulated with closed-cell foam
insulation
࡛
18 shielded cable, for communication (F1/ F2) wiring
࡛
14/3 flexible metallic underground cable with green grounding
wire, for power wiring from the outdoor unit to the indoor unit
࡛
5/8-inch ID drain hose with adapter fitting, for gravity
drain applications that require an extension
Summary of Contents for AR TSFA Series
Page 28: ......