viewing
_13
E
NGLISH
1. Push the lever as arrow
indicates on the rear side
of the remote control and
pull up.
2. Insert two AAA batteries.
Check and match the “+” and
“-” signs accordingly. Make
sure you have inserted the
batteries in correct position.
3. Close the cover by place it
back to its original position.
You should hear click sound
when the cover is locked
properly.
Remote control display
Using the remote control
t
Point the remote control towards the remote control sensor of the unit.
t
When properly pressing the button on the remote control, you will hear beep sound
from the unit.
t
The signal may not be received well of electronic lighting style fluorescent lamps,
such as inverter fluorescent lamps are in the same space.
t
If other electrical products operate by the remote control, call your nearest contact center.
Inserting the batteries
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of
with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate
that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are
not properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and
recycle them through your local, free battery return system.
