20
Troubleshooting
PROBLEM
SOLUTION
Timer function is not working.
• Check if the air conditioner is off. Turn the air conditioner on and set the Timer
function.
• When the timer is already set icon will appear on the indoor unit display, check to
see if the timer is already set.
Odors permeate in the room during
operation.
• Odor may permeate depending on the surrounding environment or operating
condition. Ventilate the indoor air or operate Fan mode for 1~2 hours if the odor
does not go away. (Parts of the air conditioner does not generate any odor)
• Clean the air filter if it is dirty.
Error is indicated.
• If the message
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
blink on the indoor unit display, it means
there is a problem so you should contact a service center.
Noise is generated.
• Depending on the status of the air conditioner usage (especially when the
outdoor temperature is below 20°C), noise can be generated due to changes in
refrigerant flow. You don’ t have to worry since it is normal.
Water is dropping from the
connection part of the drain pipe.
• Water may be generated because of the temperature difference. It is normal.
Indoor unit display is blinking.
• Press the
On/Off
button and check if the display keeps blinking.
• Turn off the auxiliary power switch and turn it on.
• If the display keeps blinking after following above 2 instructions, contact the
service center.
Heat is generated from the control
panel on the indoor unit.
• When the air conditioner is on, little bit of heat may be generated from the
control panel. It is normal.
Air conditioner is not turning off.
• After turning off the air conditioner, it may generate breeze for certain period of
time for defrosting. It is normal.
PAC_아프리카 중동향AP80S0A_IBIM_34514A-02_EN.indd 20
2015-04-23 오후 2:18:56