viewing
_13
Installing the batteries
1. Push the lever as arrow
indicates on the rear side
of the remote controller
and pull up.
2. Insert two AAA batteries.
Check and match the “+”
and “-” signs accordingly.
Make sure you have inserted
the batteries in correct
position.
3. Close the cover by place
it back to its original
position.
You should hear click sound
when the cover is locked
properly.
Remote controller display
Air swing indicator
Transmit indicator
Set temperature/time
indicator
Fan speed indicator
Auto
Low
Medium
High
Low battery indicator
Using the remote controller
•
Point the remote controller towards the remote controller receiver of the indoor unit
(see page 11 to find the location of remote control receiver).
•
When you properly press the button on the remote controller, you will hear ring sound
from the indoor unit.
•
The signal may not be received well of electronic lighting style fluorescent lamps
such as inverter fluorescent lamps are in the same space.
•
If other electrical products operate by the remote controller, call your nearest contact
center.
On/Off timer indicator
Operation mode
indicator
When the Heat mode is selected Heat mode indicator will be displayed on the remote controller and
the indoor unit will make sound, but your air conditioner is not actually operating in Heat mode.
If you turn on the air conditioner after turning it off with the Heat mode selected on the remote
controller, it will operate in Auto mode but the remote controller will still show Heat mode on the
display. Press the Mode button to match the mode indicator on the remote controller.
AP36M0A_IBIM_E_DB98-33839A-1.indd 13
2011-06-10 오후 1:37:36
