18_
operating
operating basic function
SELECTING OPERATION MODE
Heat (Only applicable for AP30N1A model)
The air conditioner heats as well as cools. Warm your room with this versatile appliance in the
cold of winter.
1.
Turn on the air conditioner.
Press the
Power
button on the remote controller.
2.
Set the operation mode.
Press the
Mode
button on the remote controller until
Heat mode indicator appears on the remote controller
display.
The air conditioner operates in Heat mode and warms
your room.
Each time you press the
Mode
button, the mode will
change in order of Auto, Cool, Dry, Fan and Heat*.
(*Heat mode is applicable for AP30N1A model only.)
3.
Set the temperature.
Press the
Temp
or
button on the remote controller
to increase or decrease the desired temperature.
You can set the desired temperature between
the range of 16˚C~30˚C.
You can increase/decrease the temperature by 1˚C.
4.
Set the fan speed.
Press the
Fan
or
button on the remote controller
to set the desired fan speed.
If room temperature reaches desired value, heating will
stop for a while.
• Each time you press the
Fan
or
button, fan
speed will change in order of Auto, Low, Medium
and High.
• Fan may not operate for about 3~5 minutes at the
beginning to prevent any cold blasts while the air
conditioner is warming up.
•
Air flow can be adjusted manually (see page 19 for instructions).
•
Since the air conditioner heats the room by taking heat energy from outdoor air, the
heating capacity may decrease when outdoor temperature is extremely low.
Use an additional heating appliance in combination with the air conditioner if you feel the
air conditioner heats insufficiently.
•
Frost may form in outdoor unit during Heat mode. Defrost indicator will light up when
the outdoor unit starts removing frost and it will disappear when the operation is done.
AP28N0A_IB_E_31713-1.indd 18
2010-02-10 ｿﾀﾈﾄ 12:48:20
