• Make sure that you earth the cables .
- Do not connect the earth wire to the gas pipe, water pipe, lighting rod or telephone wire . If earthing is not
complete, electric shock or fire may occur .
• Install the circuit breaker .
- If the circuit breaker is not installed, electric shock or fire may occur .
• Make sure that the condensed water dripping from the drain hose runs out properly and safely .
• Install the power cable and communication cable of the indoor and outdoor unit at least 1 m away from the
electric appliance .
• Install the indoor unit away from lighting apparatus using the ballast .
- If you use the wireless remote controller, reception error may occur due to the ballast of the lighting apparatus .
• Do not install the air conditioner in following places .
- Place where there is mineral oil or arsenic acid . Resin parts flame and the accessories may drop or water may
leak . The capacity of the heat exchanger may reduce or the air conditioner may be out of order .
- The place where corrosive gas such as sulfurous acid gas generates from the vent pipe or air outlet . The copper
pipe or connection pipe may corrode and refrigerant may leak .
- The place where there is a machine that generates electromagnetic waves . The air conditioner may not
operate normally due to control system .
- The place where there is a danger of existing combustible gas, carbon fiber or flammable dust . The place
where thinner or gasoline is handled . Gas may leak and it may cause fire .
CAUTION
ENGLISH-5
01
PREAP
AR
ATION
DVM PAC Mirage_IM_05674A-00_EN.indd 5
2016-04-04 오전 11:46:06
