Samsung AM036JNCDCH, Installation Manual

Page: 18 / 33

18
Setting an indoor unit address and installation option
Option setting Status
12. Setting Cool mode
Press Mode button to be change to Cool mode in the OFF status.
Cool
Off
13. Setting SEG16, SEG17 option
Press Low Fan button(
∨
) to enter SEG16 value.
Press High Fan button(
∧
) to enter SEG17 value.
Each time you press the button,
⋯
will be selected in rotation.
Cool
Off
Cool
Off
14. Setting Dry mode
Press Mode button to be change to Dry mode in the OFF status.
Off
Dry
15. Setting SEG18, SEG20 option
Press Low Fan button(
∨
) to enter SEG18 value.
Press High Fan button(
∧
) to enter SEG20 value.
Each time you press the button,
⋯
will be selected in rotation.
Off
Dry
Off
Dry
16. Setting Fan mode
Press Mode button to be change to Fan mode in the OFF status.
Off
Fan
17. Setting SEG21, SEG22 option
Press Low Fan button(
∨
) to enter SEG21 value.
Press High Fan button(
∧
) to enter SEG22 value.
Each time you press the button,
⋯
will be selected in rotation.
Off
Fan
Off
Fan
18. Setting Heat mode
Press Mode button to be change to HEAT mode in the OFF status.
Off
Heat
19. Setting SEG23, SEG24 mode
Press Low Fan button(
∨
) to enter SEG23 value.
Press High Fan button(
∧
) to enter SEG24 value.
Each time you press the button,
⋯
will be selected in rotation.
Off
Heat
Off
Heat
SEG16
SEG18
SEG21
SEG23
SEG17
SEG20
SEG22
SEG24
Step 4. Input option
Press operation button with the direction of remote control for set.
For the correct option setting, you must input the option twice.
Step 5. Check operation
1. Reset the indoor unit by pressing the RESET button of indoor unit or outdoor unit.
2. Take the batteries out of the remote controller and insert them again and then press the operation button.
Step 3. Check the option you have set
After setting option, press button to check whether the option code you input is correct or not.
On
Auto
¤
¤
¤
¤
¤
¤
¤
¤
¤
On
Cool
On
Dry
On
Fan
On
Heat
Auto
Off
Cool
Off Off
Dry
Off
Fan
Off
Heat