manualshive.com logo in svg

Samsung AM005AN1PCH/AA, Service Manual, Page: 285 / 670

Share
Download
Samsung AM005AN1PCH/AA Service Manual Download Page 285

Disassembly and Reassembly

Samsung Electronics

285

No

Parts

Procedure

Remark

1

CABINET

(Continues)

   

Stop the air conditioner operation and shut 

  off the main power. 

1)   Remove the 4 screws in CABI TOP left/right 

side and then separate it.

2)   Remove the 2 screws in ASSY CABI FRONT 

upper part. Tilt the  CABINET forward and 
then separate upward.

3)   ASSY CABI BACK separate by method such as 

upside.

4)   Remove the 4 screws from COVER CONTROL 

and then pull it forward. 

■

 

AM160/250FNBFEB, AM160/250FNBFGB

①

②

Summary of Contents for AM005AN1PCH/AA































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments