Samsung AM***KNTD**, User Manual

Page: 43 / 52

43 English
Ins
tallation par
t
Setting an indoor unit installation option (suitable for the condition of each installation location)
1
Check whether power is supplied or not.
– When the indoor unit is not plugged in, there should be additional power supply in the indoor unit.
2 Set the installation option according to the installation condition of an air conditioner.
– The default setting of an indoor unit installation option is 020010-100000- 200000-300000.
– Individual control of a remote control(SEG20) is the function that controls an indoor unit individually when there
is more than one indoor unit.
3 Set the indoor unit option by wireless remote control.
02 series installation option
SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
0 2 -
External room temperature
sensor / Minimizing
fan operation when
thermostat is off
Central control
FAN RPM
compensation
SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
1 - - -
EEV Step when
heating stops
-
SEG13 SEG14 SEG15 SEG16 SEG17 SEG18
2
External
control
External control output
/ External heater On or
Off signal
S-Plasma ion Buzzer
Number of hours
using filter
SEG19 SEG20 SEG21 SEG22 SEG23 SEG24
3
Individual
control of a
remote control
Heating setting
compensation /
Removing condensated
water in heating mode
EEV Step of stopped unit
during oil return/defrost
mode
- -
• When setting the option other than above SEG values,
the option will be set as “0”.
• SEG5 central control option is basically set as 1 (Use),
so you don’t need to set the central control option
additionally.
However, if the central control is not connected but
it doesn’t indicate an error message, you need to set
the central control option as 0 (Disuse) to exclude the
indoor unit from the central control.
• The external output of SEG15 is generated by
MIM-B14 connection. (Refer to the manual of
MIM-B14.)
You can connect MIM-B14 to
two female wires at the back
side of the indoor unit.
DVM_BORACAY_IB_DB68-06415A-00_EN.indb 43 2016-08-31 오후 2:13:30