18
Installation Procedure
Ins
tallation Pr
oc
edur
e
English
3
Insert both sides of core wire of the power cable into
the connection sleeve.
•
Method 1
: Push the core wire into the sleeve from
both sides.
•
Method 2
: Twist the wire cores together and push
it into the sleeve.
Method 1
Method 2
Connection sleeve
Connection sleeve
4
Using a crimping tool, compress the two points and
flip it over and compress another two points in the
same location.
• The compression dimension should be 8.0.
Compression
dimension
• After compressing it, pull both sides of the wire to
make sure it is firmly pressed.
Method 1
Method 2
Compress it 4 times
Compress it 4 times
5 mm
5 mm
5
Wrap it with the insulation tape twice or more and
position your contraction tube in the middle of the
insulation tape.
Three or more layers of insulation are required.
Method 1
Method 2
Insulation tape
Insulation tape
40 mm
35 mm
6
Apply heat to the contraction tube to contract it.
Contraction tube
7
After tube contraction work is completed, wrap it with
the insulation tape to finish.
Insulation tape
CAUTION
• Make sure that the connection parts are not
exposed to outside.
• Be sure to use insulation tape and a contraction
tube made of approved reinforced insulating
materials that have the same level of withstand
voltage with the power cable. (Comply with the
local regulations on extensions.)
WARNING
• In case of extending the electric wire, please DO NOT
use a round-shaped pressing socket.
– Incomplete wire connections can cause electric
shock or a fire.
Summary of Contents for AE022MNJDEH
Page 34: ......