Samsung AD18A1(B1)E09, Service Manual

Page: 32 / 57

5-6
Samsung Electronics
5-3-2 No Power (Outdoor unit)
1 ) Inspection items
(1) Á Is the power source normal (The rating Voltage ±10% range)?
(2) Is the outdoor power connected normally? ((1) of terminal : L, (2) of terminal : N, (3) of termi-
nal : communication) ?
(3) Check whether the display of outdoor PCB(SEG1) is shown in the order of A- B - C when the
power is applied.
If the display (SEG 1) is not shown the inspection and repair shall be performed in the
sequence of the following:
2 ) Inspection sequence
Troubleshooting
Normal of
outdoor PCB
Replace the fuse
(F701) 250V 3.15A.
Replace the
transformer
Assemble the transformer
in the normal way.
Put the power off and put it on after 5
seconds.
Replace the outdoor unit Ass'y main PCB.
Reinstall the power cord and commu -
nication line with the reference of
installation manual.
Replace the fuse F101 (250V 2 A).
Replace the IC 02 (KA7805)
Check and Replace the rectifying
diode of power side (D101 - D104)
and KA 7812.
After watching the display of PCB
board, assemble the color and
shape of housing correctly as fol-
lows:
Is the display of PCB shown in the
sequence of A-B-C?
Check the com-
munication of PCB
and whether the
LED 1 is continu-
ously flickering.
Are the power cord ((1) L, (2) N) and
communication line (3) of outdoor termi -
nal block connected correctly?
Is the terminal of PCB terminal (RY71,
72, 73) are assembled in the cor rect
position?
Is the fuse open? (F701)
Is the fuse (F101, 250V 2 A) blown out?
Check whether the output voltage of
IC01 (KA 7812) is DC 12V.
Check whether the output voltage of
IC02 (KA 7805) is DC 5V.
Insert the primary side of power trans-
former in the terminal GT01 and then is
the voltage of secondary side normal?
(AC 15V- AC 25V)
Measurement of resistance
of power transformer
Are they as follows?
1st side 190 ~ 210
Ω
2nd side 0.9 ~ 1.1
Ω
BLK
BLK
RED
RED
WHT
Y Y
N
N
Y
Y
N
Y
N
Y
N N
Y
Y
Y
N
N
Y
N
N