4
Safety Information
English
Saf
ety
Inf
or
mation
• This unit is a partial unit air conditioner, complying
with partial unit requirements of this International
Standard, and must only be connected to other
units that have been confirmed as complying to
corresponding partial unit requirements of this
International Standard.
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do
not play with the appliance.
Installing the unit
WARNING
IMPORTANT: When installing the unit, always remember
to connect first the refrigerant tubes, then the electrical
lines.
• Always disassemble the electric lines before the
refrigerant tubes.
• Upon receipt, inspect the product to verify that
it has not been damaged during transport. If the
product appears damaged, DO NOT INSTALL it and
immediately report the damage to the carrier or
retailer (if the installer or the authorized technician has
collected the material from the retailer.)
• After completing the installation, always carry out a
functional test and provide the instructions on how to
operate the air conditioner to the user.
• Do not use the air conditioner in environments with
hazardous substances or close to equipment that
release free flames to avoid the occurrence of fires,
explosions or injuries.
• Excessive indoor humidity or clogged condensate
drain lines may cause water to drip from indoor units.
Do not install the indoor unit where dripping could
result in damage to property, such as above electronic
equipment or other sensitive instruments
• Our units must be installed in compliance with the
space specifications presented in the installation
manual in order to ensure accessibility from both sides
and allow repairs or maintenance operations to be
carried out.
The unit’s components must be accessible and easy to
disassemble without endangering people and objects.
For this reason, where it is not observed as indicated
into the Installation Manual, the cost necessary
to reach and repair the unit (in safety, as required
by current regulations in force) with slings, trucks,
scaffolding or any other means of elevation won’t be
considered in-warranty and charged to end user.
• If any gas or impurities, except R-410A refrigerant,
come into the refrigerant pipe, serious problem may
occur and it may cause injury.
Use the supplied accessories, specified components
and tools for the installation.
– Do not use the pipe and the installation product
used for the R-22 refrigerant.
– Failure to use the specified components can cause
product fall down, water leakage, electrical shock,
and fire. (The pipe and flare components used for
R-22 refrigerant must not be used)
Power supply line, fuse or circuit
breaker
WARNING
• Always make sure that the power supply is compliant
with current safety standards. Always install the air
conditioner in compliance with current local safety
standards.
• Always verify that a suitable grounding connection is
available.
• Verify that the voltage and frequency of the power
supply comply with the specifications and that the
installed power is sufficient to ensure the operation of
any other domestic appliance connected to the same
electric lines.
• Always verify that the cut-off and protection switches
are suitably dimensioned.
DB68-11272A-00_IM_CAC WindFree1,4way_AA_EN_.indd 4
DB68-11272A-00_IM_CAC WindFree1,4way_AA_EN_.indd 4
2021-09-17 오후 12:14:13
2021-09-17 오후 12:14:13
