6
Preparation for outdoor unit installation
Moving the Outdoor Unit by Wire Rope
Fasten the outdoor unit by two 8m or longer wire ropes as shown at the
figure . To prevent from damage or scratches, insert a piece of cloth between
the outdoor unit and rope, then move the unit .
❋
❋
The appearance of the unit may be different from the picture depending
on the model .
Plate protection
cloth
Wire rope
Deciding on where to install the outdoor unit
Outdoor Unit
f
f
The outdoor unit must not be placed on its side or upside down, as the compressor lubrication oil will run into the cooling
circuit and seriously damage the unit .
f
f
Choose a location that is dry and sunny, but not exposed to direct sunlight or strong winds .
f
f
Do not block any passageways or thoroughfares .
f
f
Choose a location where the noise of the air conditioner when running and the discharged air do not disturb any
neighbours .
f
f
Choose a position that enables the pipes and cables to be easily connected to the indoor unit .
f
f
Install the outdoor unit on a flat, stable surface that can support its weight and does not generate any unnecessary noise
and vibration .
f
f
Position the outdoor unit so that the air flow is directed towards the open area .
f
f
Maintain sufficient clearance around the outdoor unit, especially from a radio, computer, stereo system, etc .
Fuse
Outdoor Unit
Stereo
1 .5m or mor
e
Indoor Unit
Control
Air Guide Duct
(This product is not
provided by Samsung)
1m or mor
e
1m or mor
e
1 .
5m or mor
e
1 .5m or mor
e
1 .5m or mor
e
Fuse
200mm
300mm
f
f
If the outdoor unit is installed at a height, ensure that its base is firmly fixed in position .
f
f
Make sure that the water dripping from the drain hose runs away correctly and safely .
CAC GD-EU_IM_32793A-23_EN.indd 6
2016-05-25 오후 7:08:24
