20
Interface module Installation (Optional)
Interface module
DC power cable
Communication cable
PCB Case
Cable-tie
Accessories (Interface module : MIM-B13D)
Accessories (SPI module : MSD-EAN1)
1. Fix the case at with bolts on the side of the control box in the indoor unit.(See the picture)
2. Attach the Interface module PCB to the case in the control box of the indoor unit, then
connect the power and the communication cable between the Interface module and the
indoor unit;
3. If you install a Interface module to an indoor unit, every outdoor unit which is connected to an
indoor unit can be controlled simultaneously.
4. Each indoor unit connected to the same centralized
controller has its own Interface
module.
Refer to the
SPI
module(MSD-EAN1) installation manual for the more information.
Accessories (Interface module : MIM-B14)
External Control
PCB Case
Haness Wire(2P)
Haness Wire (4P)
Screw
Only for : Global Duct Type
Summary of Contents for AC026HBLDKH
Page 1: ......
