English - 33
If
Security key
is not set: When the security setting of AP that supports WPS is NONE,
you can select
PBC, PIN, None Security
.
None Security
is capable of connecting to AP
directly without using WPS function.
Process of
PBC, PIN
is same as above. Refer to if
Security key
is already set.
Try again if connecting operation doesn’t work.
Ad-hoc
: You can connect to a mobile device without an access point through the
‘Samsung Wireless LAN Adapter’ by using a peer to peer network.
How to connect to new Ad-hoc
1.
Choose
Select a network
, then a device list is displayed.
2.
While in the device list, press the Blue button on the remote or select
Ad-hoc
.
The message
The existing network system may have limited
functionality. Do you want to change the network connection?
is
displayed.
3.
Input the generated
Network Name(SSID)
and
Security key
into the
device you want to connect.
N
How to connect an existing Ad-hoc device
1.
Choose
Select a network
, the device list is displayed.
2.
Select the device you want in the Device list.
3.
If security key was applied, input the security key again.
If network doesn’t operate normally, please check the
Network Name(SSID)
and
Security key
again. If the
Security key
is
incorrect, it may be the reason for the malfunction.
N
Wireless Network Setup-Auto
If you want to connect AP, AP should support DHCP. Only devices which support
Ad-hoc
mode
can be connected without DHCP.
1.
Set
Network Type
to
Wireless
.
2.
Select
Wireless Network Setup
.
3.
Set
Internet Protocol Setup
to
Auto
.
The Internet Protocol is set automatically.
4.
Select a network through
Select a network
.
5.
Select
Network Test
to check the network connectivity.
Wireless Network Setup-Manual
1.
Set
Network Type
to
Wireless
.
2.
Select
Wireless Network Setup
.
3.
Set
Internet Protocol Setup
to
Manual
.
4.
Set up
IP Address, Subnet Mask, Gateway
and
DNS Server
.
Press the number buttons on the remote control when you set the Network manually.
5.
Select a network through
Select a network
.
6.
Select
Network Test
to check the network connectivity.
●
N
N
N
N
Wireless Network Setup
U
Move
E
Enter
R
Return
Select a network
3/9
Search
Ad-hoc
sson
jee
AP_1
Ap_2
PBC
PIN
None Security
Internet Protocol Setup
: Auto
▶
Network Test
Select a network
: AP1
U
Move
E
Enter
R
Return
Wireless Network Setup
IP Address
:
Subnet Mask
:
Gateway
:
DNS Server
:
Internet Protocol Setup
: Manual
▶
Network Test
Select a network
: AP1
U
Move
E
Enter
R
Return
Wireless Network Setup
IP Address
: 0 0 0 0
Subnet Mask
: 0 0 0 0
Gateway
: 0 0 0 0
DNS Server
: 0 0 0 0
The existing network system may have limited
functionality. Do you want to change the network
connection?
Yes
No
[8100_Italy]BN68-02330J-01Eng.in33 33
2009-09-10 ¿ÀÈÄ 1:41:32