11
English
✎
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
✎
When connecting an external device, match the colour of the connection terminal to the cable.
1
AV IN
,
COMPONENT IN / AV IN1
‒ Connect audio cables to "[L-AUDIO-R]" on your TV and the other ends to corresponding audio out jacks on an A/V
device.
‒ Connect RCA audio cables (optional) to "[L-AUDIO-R]" on the rear of the TV set and the other ends to
corresponding audio out jacks on the external device.
‒
When connecting to
AV IN
, the colour of the
AV IN [Y/VIDEO]
jack (Green) does not match the colour of the video
cable (Yellow).
2
USB (5V 0.5A)
,
USB (HDD/1.0A) / CLONING
‒ Connector for software upgrades and Media Play, etc.
‒
Service connection.
3
HDMI IN / HDMI IN (ARC) / HDMI IN (DVI)
Connects to the HDMI jack of a device with an HDMI output.
✎
No sound connection is needed for an HDMI-HDMI connection. HDMI connections carry both audio and video.
✎
Use the
HDMI IN (DVI)
jack for a DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI
adapter (DVI to HDMI) for the video connection and the
PC/DVI AUDIO IN
jacks for audio.
4
LAN
Connect to a wired LAN using CAT 7 cable.
5
ANT IN (SATELLITE)
,
(AIR/CABLE)
‒
To view television channels correctly, the TV must receive a signal from one of the following sources:
‒ An outdoor antenna / A cable television system
6
HEADPHONE JACK
Headphones may be connected to the headphone jack on your TV. While the headphones are connected, the sound
from the built-in speakers is disabled.
7
RJP
This port is an RJP (Remote Jack Pack) communication port that enables connecting different devices to additional
modules to improve device use and convenience.
8
PC/DVI AUDIO IN
Connects to the audio out jack of an external DVI device using a 1/8th inch stereo phone jack cable. Some DVI devices
may not or should not need this connection audio.
9
PC IN
Connect to the video output jack on your computer.
0
VOL-CTRL
Used to control the volume of the Bathroom speaker. Connect the Bathroom Wall Box and the VOLCTRL port.
!
VARIABLE AUDIO OUT
Used for the audio output to the Bathroom speaker. Connect the Bathroom Wall Box and the Variable port (RCA).
@
CLOCK
Set the time after connecting the cable of the External Clock to Clock jack. You can use the External Clock Display
function.
#
DATA
‒ Used to support data communication between the TV and the SBB.
‒ Connects using RJ-12 TV type plugs.
$
DIGITAL AUDIO OUT (OPTICAL)
Connects to a Digital Audio component.