Samsung 500N - CLP Color Laser Printer, Setup Manual

Page: 196 / 245

U
SING
Y
OUR
P
RINTER IN
L
INUX
A. 6
Changing the Printer Connection Method
If you change the printer connection method from USB to
parallel or vice versa while in use, you must re-configure your
Linux printer by adding the printer to your system. Take the
following steps:
1
Make sure that you connect the printer to your computer.
Turn both the computer and the printer on.
2
When the Administrator Login window appears, type in
“
root ” in the Login field and enter the system password.
N
OTE
: You must log in as a super user (root) to install a new
printer to the printing system. If you are not the super user, ask
your system administrator.
3
From the Startup Menu icon at the bottom of the desktop,
select
Linux Printer and then Configuration Tool .
You can also access the Linux Printer Configuration window
by typing “
linux-config ” in the Terminal screen.
4
When the Linux Printer Configuration window appears, click
the
Add Printer icon on the tool bar at the top of the
window.
5
Click the Connection tab at the top of the Add a Printer
window.
Ensure that the printer port is set properly. If not, change
the device setting.
6
Click OK .