- 13 -
LGE Internal Use Only
Copyright LG Electronics. Inc. All right reserved.
Only for training and service purposes
4.1.4 LAN inspection solution
• LAN Port connection with PCB
• Network setting at MENU Mode of TV
• Setting automatic IP
• Setting state confirmation
- If automatic setting is finished, you confirm IP and MAC
Address.
4.1.5 LAN Port Inspection (PING Test)
4.1.5.1 Equipment setting
1) Play the LAN Port Test PROGRAM.
2) Input IP set up for an inspection to Test Program.
*IP Number : 12.12.2.2
4.1.6 LAN Port Inspection (PING Test)
1) Play the LAN Port Test Program.
2) connect each other LAN Port Jack.
3) Play Test (F9) button and confirm OK Message.
4) remove LAN CABLE
4.2. Using RS-232C
Adjust 3 items at 3.1 PCB assembly adjustments “adjustment
sequence” one after the order.
A
Adjustment protocol
See ADC Adjustment RS232C Protocol_Ver1.0
A
Necessary items before Adjustment items
• Pattern Generator : (MSPG-925FA)
•Adjust 480i Comp1 (MSPG-925FA:model :209 , pattern
:65) – Comp1 Mode
• Adjust 1080p Comp1 (MSPG-925FA:model :225 ,
pattern :65) – Comp1 Mode
• Adjust RGB (MSPG-925FA:model :225 , Pattern :65) –
RGB-PC Mode
* If you want more information then see the below
Adjustment method (Factory Adjustment)
A
Adjustment sequence
• aa 00 00: Enter the ADC Adjustment mode.
• xb 00 40: Change the mode to Component1 (No actions)
• ad 00 10: Adjust 480i Comp
• ad 00 10: Adjust 1080p Comp
• xb 00 60: Change to RGB-PC mode(No action)
• ad 00 10: Adjust 1080p RGB
• xb 00 90: Endo of Adjustmennt
Summary of Contents for 42LW5700
Page 54: ......