background image

 

6

1-4 Installation Precautions   

 

1

.  For safety reasons, more than two people 

are required for carrying the product. 

 
2.  Keep the power cord away from any heat 

emitting devices, as a melted covering may 
cause fire or electric shock. 

 
3.  Do not place the product in areas with poor 

ventilation such as a bookshelf or closet. The 
increased internal temperature may cause 
fire. 

 
4.   Bend the external antenna cable when 

connecting it to the product. This is a measure 
to protect it from being exposed to moisture. 
Otherwise, it may cause a fire or electric shock. 

 
5.   Make sure to turn the power off and unplug the 

power cord from the outlet before repositioning 
the product. Also check the antenna cable or 
the external connectors if they are fully 
unplugged. Damage to the cord may cause fire 
or electric shock. 

 

6.  Keep the antenna far away from any high-

voltage cables and install it firmly. Contact 
with the high- voltage cable or the antenna   

      over may cause fire or electric shock. 

 

7.      When installing the product, leave enough 

space (10cm) between the product and the wall 

for ventilation purposes. A rise in temperature 

within the product may cause fire. 

 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

Summary of Contents for 2220WM - SyncMaster - 22" LCD Monitor


















































Reviews: