Samsung 215TW - SyncMaster - 21" LCD Monitor, Service Manual

Page: 43 / 65

10 Operating Instructions and Installation
10-2
1)Dynamic
Select this mode to view a sharper image than
in "Standard" mode.
2) Standard
Select this mode when the surroundings are
bright. This also provides a sharp image.
3) Movie
Select this mode when the surroundings are
dark.
This will save power and reduce eye fatigue.
4) Custom
Select this mode when you want to adjust the
image according to your preferences.
3. Volume button [ ]
When OSD is not on the screen, push the
button to adjust volume.
4. Enter button [ ] / SOURCE button
Activates a highlighted menu item. /
Push the 'SOURCE', then selects the video
signal while the OSD is off. (When the
SOURCE button is pressed to change the input
mode, a message appears in the upper left of
the screen displaying the current mode --
Analog, Digital, AV, S-Video and Component
input signal.)
Note : Changing the source is allowed only in
external devices that are connected to the
monitor at the time.
5. AUTO button
(Available in Analog mode only)
When the 'AUTO' button is pressed, the Auto
Adjustment screen appears as shown in the
animated screen on the center.
Press to self-adjust to the incoming Analog
signal. The values of fine,coarse and position
are adjusted automatically.
6. PIP button
(Available in Analog/Digital(PC) Mode Only)
In Analog or Digital Mode, turns on Video
screens in PIP Mode.
You can view a picture from Video, S-Video, or
Component through the PIP screen in Analog
and Digital (PC) mode.
7. Power button [ ]
Use this button for turn the monitor on and off.
Power indicator
This will enable you to see the overall power
status of the system. For more information, see
the PowerSaver section.
8.
Headphone sound output terminal
9. Speaker
You can hear sound by connecting the
soundcard of your PC to the monitor.