Message Monitoring OfficeServ Link Version 2.1 User Guide
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
© SAMSUNG Electronics Co., Ltd. Page 33
completed, the following state message pane appears on the screen.
Figure 4.3 Connection success message
y
The connection state of Link is indicated as
, and the AVI
picture
【
】
rotates in the bottom right corner of the window. This means the
currently connected state is normal. The static AVI picture means that the connection has
stopped running or there is an error. At this time, the [CONNECT] button of Link
【
】
changes into
】
.
Note
If there is an error in the connection between Link and PBX system, error
information is displayed on the message pane. Information of each state displayed
on the state message pane has its icon respectively.
GeneralMessage.ico
ErrorMessage.ico
The General Message Icon means that the Link notifies a user of general message,
and the Error Message Icon means that the Link notifies a user of error message
generated while the Link runs.
y
If an error occurs during the connection process, the Link performs an automatic recovery
process until the error disappears (or up to the internally limited time). If the Link cannot
perform the automatic recovery, it notifies users of the error through the status message
pane.
Figure 4.4 Automatic recovery message after error event
