manualshive.com logo in svg

Samsung 2 COLOR THERMAL PRINTER SRP-275, User Manual

Share
Download
Samsung 2 COLOR THERMAL PRINTER SRP-275 User Manual Download Page 36

 

Rev. 1.03 

- 36 -

SRP-275

10-7  Dimensions & weight 

• Dimensions 

 

 

• Weight 

  Approx. Wt. 

: 2.5 kg 

  Shipping Wt. 

: 4.0 kg 

 

10-8  Optional features 

The optional features either replace a standard feature or enhance the operation of the printer. 
All optional features are installed at the factory and must be selected when the printer is ordered. 
 
------------------------------------------------------------------------------------------------------------------------------------------------ 

•

 Auto cutter (SRP-275A : Exclude auto cutter, SRP-275C : Including auto cutter) 

------------------------------------------------------------------------------------------------------------------------------------------------ 

•

 Interface (Serial / Parallel / USB / Ethernet) 

------------------------------------------------------------------------------------------------------------------------------------------------ 

•

 Cabinet color (Ivory / Dark gray) 

------------------------------------------------------------------------------------------------------------------------------------------------

 

157

239

160

Dimension (mm)

H

D

W

Item

Summary of Contents for 2 COLOR THERMAL PRINTER SRP-275








































Reviews:

No comments

Brands by name

Popular brands

Load more brands