Samsung 2.0060510083255e16 Instruction Manual Download Page 41

Page: 41 / 50

Convenient Functions

Press the

SLEEP

button.

•

SLEEP : OFF

➝

120MIN will be selected in turn.

You can set the time that this unit will shut itself off.

To Check Sleep Timer

Press SLEEP button.

•

The remaining time before this unit will shut itself off is shown on the display.

•

Pressing the button again changes the sleep time from what you have set earlier.

To Cancel Sleep Timer

•

Press SLEEP button until SLEEP : OFF appears on the display.

To Output Sound Again

Press MUTE button again.

•

MUTE will disappear and sound will Output.

Press the

MUTE

button.

•

MUTE appears on the display.

This function is useful when answering a doorbell or telephone call.

Sleep Timer Function

Mute Function

REMOTE CONTROL

•

SLEEP, Mute and Adjust Display function can only be
operated with the remote control.

AV-R610 XAC ENG-1 5/5/06 14:4212:0 Page 40

Summary of Contents for 2.0060510083255e16



















































Search results

Summary of Contents for 2.0060510083255e16

Reviews:

Related manuals for 2.0060510083255e16

Brands by name

Popular brands

Samsung 2.0060510083255e16, Instruction Manual

Search results

Summary of Contents for 2.0060510083255e16

Reviews:

Related manuals for 2.0060510083255e16

Brands by name

Popular brands