“
” on the panel or
“
LEFT” “RIGHT
”
on remote control to “Delay” option and press them again to set the
delay time. There are 0 sec, 5 sec and 10 sec optional. The default value is 0 sec, closed. Just as shown in the following
pictures.
8
、
Parking guide line switch setting
Press “
” on the panel or
“
VIDEO” “MODE
”
on remote control to switch to
“
Others
”
option, and then press
“
” on the panel or
“
LEFT” “RIGHT
”
on remote control to “Scale line” option and press them again to
open and close it. The default state is closed. Just as shown in the following pictures.
9
、
Wireless signal channel setting
Press “
” on the panel or
“
VIDEO” “MODE
”
on remote control to switch to
“
Others
”
option, and then press
“
” on the panel or
“
LEFT” “RIGHT
”
on remote control to “Channel” option and press them again to set
the wireless signal frequency. The default state is chosen the channel automatically. There are 13PCS wireless signal
channel optional (2412
~
2484MHZ). If there is several monitors work on the same frequency, may have signal unstable
or image flicker problem, which could be improved by changing the frequency. Just as shown in the following pictures.