Important!
If the phone icon
flashes in the top left-hand corner, the connection to the heating and
district heating controller is faulty.
1.3
Selecting the operating mode
Press the
key repeatedly to cycle through the following operating modes:
Rated operation (day):
and
;
55555
…
The day set point (rated operation) will be continuously maintained regardless of the
programmed times of use.
Reduced operation (night):
;
66666
…
The night set point (reduced operation) will be continuously maintained regardless of
the programmed times of use.
Standby operation:
and
;
66666
…
Control will be switched off.
Automatic operation:
will be displayed during times of use, no symbol will be dis-
played during times of non-use;
6
…
5
…
6
Rated operation will be activated during the programmed times of use, and reduced op-
eration will be activated outside the times of use provided that the control operation has
not been switched off depending on the outdoor temperature. The controller will auto-
matically switch between the two operating modes.
Note!
The operating mode selected on the room panel will only be adopted by the heating and dis-
trict heating controller if the heating and district heating controller is set to “automatic opera-
tion.” Otherwise, after a few seconds, the room panel will again display the operating mode
as set in the heating and district heating controller.
6
EB 5570 EN
Operation
