1
Operation
The room panel, a remote room controller, will be ready for use after it has been connected
and started up. If the phone icon
located in the top left-hand corner flashes, repeat the
start-up procedure (–> p. 10).
1.1
Operating elements
Arrow keys (up and down keys)
Are used to select data and parameters.
Manual key
Is used to switch between the operating modes.
Additional operating elements accessible with the cover open
Enter key
Is used to confirm a selection or setting.
Switch-over key
Is used to switch between the operating and parameter levels.
Party key
Is used to adjust the party timer (to prolong or start rated operation).
Note that you require a slim object such as a ball-point pen in order to press the following
keys:
Telegram key
Is used to register the room panel with the associated heating and district heating
controller (start-up).
Communication key
Is used to determine the device bus address (start-up).
Reset key
Is used to reset the room panel to default values (delivery state).
Pressing the reset key requires the room panel to be started up again.
Correction key
Is used to calibrate the room sensor (–> section 2.1).
4
EB 5570 EN
Operation
