background image

7

Stage 212: Dual Handheld Wireless System

SR212 Receiver Front Panel Features

1.  Power Switch - Press to turn the receiver on or off. 

2.  IR Transmitter - During “IR SET” an infrared light is used to set the transmitter channel. 

3.  Channel A SELECT Button - Press this button to cycle through Channel A receiver’s operating 

channels. Press and hold this button to send the channel information to the transmitter via 
infrared transmission.

4.  LED Display - The 7-segment LED display shows each receiver’s current operating channel. 

The channels are indicated by 1–9 and A–C.

5.  VOLUME Control (CH A) - This knob sets the level of the audio signal being output through 

the CH A output jacks on the rear panel. Reference level is obtained when the knob is 
turned fully clockwise (to its “10” setting).

6.  Channel A AF Indicator - Lights green when the corresponding Channel A VH212 transmitter 

is powered on, and there is an audio signal present and detected by the receiver. The 
indicator lights red when the transmitted audio signal is overloaded. 

7.  Channel A RF Indicator - Lights orange when the corresponding Channel A VH212 

transmitter is powered on, and there is an RF signal present and detected by the receiver. 

8.  Channel B AF Indicator - Lights green when the corresponding Channel B VH212 transmitter 

is powered on, and there is an audio signal present and detected by the receiver. The indi-
cator lights red when the transmitted audio signal is overloaded. 

9.  Channel B RF Indicator - Lights orange when the corresponding Channel B VH212 transmit-

ter is powered on, and there is an RF signal present and detected by the receiver.

10.  Volume Control (Channel B) - This knob sets the level of the audio signal being output 

through the CH A output jacks on the rear panel. Reference level is obtained when the 
knob is turned fully clockwise (to its “10” setting).

11.  LED Display - The 7-segment LED display shows each receiver’s current operating channel. 

The channels are indicated by 1–9 and A–C.

12.  Channel B SELECT Button - Press this button to cycle through Channel B receiver’s operating 

channels. Press and hold this button to send the channel information to the transmitter via 
infrared transmission.

13.  Channel Label - The channel label designates the frequency group. The label color matches 

the label color of the corresponding handheld microphone transmitter. 

1

2

3

4

5

7

6

9

8

12

11

10

13

Summary of Contents for Stage 212

















Reviews: